Flapwheels are one of the most underestimated and underutilized abrasive finishing tools. With different variations of KLINGSPOR Flapwheels, sanding and finishing of shaped parts, convex or concave, moldings, etc. can be accomplished. Whether working on metal, wood, plastics, or a variety of other substances, you'll achieve maximum results. SMD611 Flapwheels MUST be used with SMD 612 Mounting Plates!

Various grits and sizes available. Contact CR for more info.
DO NOT EXCEED MAX RPMs!

KM 613 Spindle-Mounted Flapwheels, which will fit in almost any 1/4" tool, finish small parts often diminishing the need for hand sanding. Superb for finish-sanding of small wood or metal contoured parts, in and around radii or into holes.

Grits: 60, 80, 120, 180, 240
DO NOT EXCEED MAX RPMs!

NCS 600 Spindle Mounted Finishing Flapwheels are perfect for final finish-sanding of small wood or metal contoured parts, in and around radii or into holes.

Grits: 60, 100, 150 / Silicon Carbide - 240
DO NOT EXCEED MAX RPMs!

NCW 600 Finishing Flapwheels is a very fine sanding form of flapwheel that conforms to contoured parts and puts a beautiful satin finish on most metals or finish-sands contoured wood parts.
Grits: 80, 100, 150, 180.
NCW600 Flapwheels MUST be used with SMD612 Mounting Plates
Vonnegut loadings save long periods of time. The secret is inside, just open and twist, and your sandpaper supply extends.

Grits: 80, 100, 120, 150, 180, 220. 
Standard loadings are 1/4" skip staggered.
Available Materials: LS 309, CS 321
The Mac Mop is the very best tool on the market for sanding and final finish sanding of the most severe profiles - metal or wood.


 

Grits: 80 -180

Stationary Mounts - 10" x 2", 10" x 4"

1/4" shank - 7" x 1", 7" x 2"

The Mac Mop MUST be used with SMD612 Mounting Plates!